Ceramic tile removal
Removal of ceramic tile, terrazzo, granite, limestone, marble, natural stone etc. that has been applied with thin set mortar is achieved by using a "tile bit" in the accessory ceramic tile jaw attachment on the Terminator's jaw assembly. With ceramic tile removal rates of up to 200ft²/hour, extra weight packages can be added for the toughest tile removal jobs, and the optional water misting attachment controls the dust created by the removal operation. Additionally, Terminator Services UK offer a full line of HTC floor finishing and Ermator dust collection service that provide a fine complement to the brutal removal power of the Terminator.
INTERIOR & EXTERIOR SURFACE REMOVAL
VCT, VAT & sheet vinyl removal
Removal rates as high as 20,000 ft2 per day
Layers of vinyl composition tile (VCT), vinyl asbestos tile (VAT) and sheet vinyl including up to 75% of the mastic can be removed with the Terminator in the first pass. Removal rates as high as 20,000ft² of VCT, VAT and vinyl have been achieved by the Terminator in a single eight hour work day. The Terminator's unique blade assembly lifts material from the substrate, proving less problematic than the hand chipping method of removal. Equipped with the standard catalytic converter and the available water misting attachment, airborne particles and CO emissions are kept well within acceptable tolerances while removing vinyl asbestos tile in a contained asbestos abatement situation.
INTERIOR & EXTERIOR SURFACE REMOVAL
Carpet removal
Removal rates as high as 20,000ft² per day
The Terminator 2000 was originally designed for extremely difficult carpet removal jobs such as the vinyl backed carpet used at The Boeing Company. With removal rates of up to 2500ft²/hour (manufacturers figures), the Terminator is effective with any carpet, including vinyl, action, enhancer, rubber, and unitary backed carpets. The Terminator's proprietary stationary blade assembly is forced under the mastic, peeling carpet strips from the substrate, while removing up to 75% of the mastic in the first pass. If necessary, the blade can be positioned to remove the carpet from a tile surface, leaving the tile below intact! There simply is no more effective way to remove carpet than with a Terminator.
INTERIOR & EXTERIOR SURFACE REMOVAL
Hardwood removal
The Terminator 2000 effectively removes laminated parquet, tiles, and planking along with conventional hardwood parquet and planking glued to concrete surfaces with traditional hardwood adhesive. The majority of the mastic is removed with the material in the first pass. The Terminator produces hardwood flooring removal rates of up to 1000ft²/hour.
INTERIOR & EXTERIOR SURFACE REMOVAL
Elastometric coating removal
The Terminator's strength and versatility is truly shown when removing elastomeric coating from parking surfaces, concrete decks, flat concrete roof decks, boat decks, neoprene coatings, rubber gym floors, and soft surface sport courts. With correct positioning of the Terminator's blade assembly, surface materials as thin as 25mm have been successfully removed (manufacturers specs).
INTERIOR & EXTERIOR SURFACE REMOVAL
Company Reg No 03635915